Project idea:

This type of project is a small house made of laminated veneer lumber, which can be assembled by two people. For self-construction, an instruction is offered that describes in detail all the nuances and necessary tools.

Winter set:

Glued laminated timber 140 × 130

  • fully-fledged construction kit for future construction with cutting cups;
  • pre-drilling for future wiring according to the project;
  • grooves were cut for the future box of windows and doors;
  • specially prepared bar for the first crown;

Glued pillar 120 × 120

Bevelled glued laminated timber

A set of hardware

Dowel, set of studs, shrinkage compensators - "jacks", anchors, spring assemblies, brackets, sliding supports.

Floor beams

Dry profile board 50 × 200, sawn to size

Rafter system

Dry planed rafters 50x200, ridge - glued laminated timber 140x130

Crate

Dry edged board 1 grade 25mm thick for lathing

Project. Assembly instructions

  • A stripping project with visual sweeps of the walls with the numbers of the logs indicated on them;
  • Detailed log-by-log installation diagram of a bar (used in case of difficulties in installation according to the main project);
  • Installation instructions for the truss system and roof;
  • Schematic diagram of electrical wiring;
  • General recommendations for the further decoration of the house (options for floors, joinery, painting, etc.);
  • Foundation plan;

Draft design - as a gift.

Summer set:

Glued laminated timber 140 × 90

  • fully-fledged construction kit for future construction with cutting cups;
  • pre-drilling for future wiring according to the project;
  • grooves were cut for the future box of windows and doors;
  • specially prepared bar for the first crown;

Glued post 90 × 90

Bevelled glued laminated timber

A set of hardware

Dowel, set of studs, shrinkage compensators - "jacks", anchors, spring assemblies, brackets, sliding supports.

Floor beams

Dry profile board 50 × 200, sawn to size

Rafter system

Dry planed rafters 50x150, ridge - glued laminated timber 140x90

Crate

Dry edged board 1 grade 25mm thick for lathing

Project. Assembly instructions

Striping project with visual sweeps of the walls with the numbers of the logs indicated on them;
A detailed log-by-log installation diagram of a bar (used in case of difficulties in installation according to the main project);
Instructions for the installation of the truss system and roof;
Schematic diagram of electrical wiring;
General recommendations for further decoration of the house (options for floors, joinery, painting, etc.);
Foundation plan;
Draft design - as a gift.

Additional services:

Additional set No. 1 "Closed circuit"


Preparing windows:
Обсадная коробка клееная, плавающий брусок, наличники, спецификация окон с указанием стандартной маркировки для быстрого приобретения, инструкция по монтажу, перечень необходимого расходного материала

• Partitions:

It is used for gables of one-story houses, as well as for internal frame walls (posts, lintels). Imitation of a bar of the 1st grade. Dry calibrated guide bar 50x100mm

• Roof finishing:

Board for decorative filing of the rafter system. Specification for additional finishing

Additional set No. 2 "Interior decoration"

• Gender:

Floorboard DP-21 in accordance with GOST 8242-88, plinth 45mm, list of consumables and insulation with requirements and brands, installation recommendations

• Ceiling:

Dry calibrated guide bar for the horizontal part of the shelf, 100x50mm; Ceiling lining 12mm - 1 grade

• Stairs + balustrade:

Single-span construction ladder, installation recommendations, specification of possible options for ladders and balustrades when equipped with ready-made ladders from major manufacturers

• Preparing doors:
Glued casing, floating bar, specification of doors, installation instructions for casing and doors

Additional set No. 3 "Exterior decoration"

Porch floors and balconies:

Floorboard DP-21, pInstallation tips, consumables list

Fencing of the balustrade of porches and balconies. Porch:

A set of elements for a typical fence, a set of elements for a typical porch and a porch fence. RInstallation tips, consumables list

Coloring:

Factory antiseptic treatment of walls as a gift. Instructions for painting walls. Specification for calculating paintwork materials

 

Our advantages:

  • Low prices and really high quality
  • The largest production, 70 years in woodworking and construction.
  • The latest technology in production
  • Strict control in production and the highest grade of wood
  • Set within a week after payment, delivery anywhere
  • Detailed instructions for quick self-assembly
  • Help desk support by phone. Technical supervision from the plant.
  • Free redevelopment
  • Full range of services, "fast assembly" service
  • An honest and detailed estimate for a complete set. Fixed prices.
  • 100% eco-friendly materials.
  • Up to 30 years warranty!
  • Loan and maternity capital