8 800 25 070 25

Opening hours 9:00-21:00 MSK

Lumber painting in production

Under the influence of moisture and ultraviolet light, the wood is gradually destroyed. That is why wooden houses need to be painted from the outside and from the inside. Standard painting on the construction site depends on weather conditions, wind and rain can delay the process, in turn, painting in production guarantees speed and 100% compliance with the technological process of painting.

  • Maximum length of the beam: 12 m.
  • Maximum cross section: 290x360 (W*H)

Technological processes of timber painting at the facility:

  • The timber is 100% sanded to white, thereby removing the entire top layer of oxidized wood
  • Antiseptic and primer are applied
  • 2-3 coats of paint are applied

Technological processes of timber painting in production:

  • The bar does not require sanding! The compositions are applied immediately after the gouging stage, on clean freshly planed wood;
  • A tinted impregnation of multifunctional wood (primer + paint) is applied on both sides.

Advantages of timber painting in production:

  • A painted house outside and inside in any season!
  • When the timber shrinks, there are no visible imperfections, because the timber is painted on all sides in production.
  • The tree is protected for the entire construction period and preserved for a long time.
  • A guarantee of full compliance with the technology of applying protective compositions of wood in production conditions.
  • Extended service life of the colored coating on the timber, due to the high adhesion of the tinted impregnation with freshly planed wood.
  • The finishing of the house on the site is performed faster, because it is enough to apply a layer of paint again, eliminating the stages of grinding and priming.
  • Significant financial savings, because all the walls in the house are painted at once! In the future, the client does not pay for painting inside.
  • Additional painting is excluded — which again leads to significant savings, as well as improves the appearance: after all, the chamfers and edges of the glulam remain in their original form and do not deteriorate.

Our customers get beautiful houses even in winter!

For painting timber in production, we use SHERWIN WILLIAMS tinted impregnation (manufactured in Sweden).

It is a universal 3-in-1 coloring compound, used as a primer, intermediate and finishing coating for exterior building structures made of wood that require shrinkage.

Technical characteristics of the SHERWIN WILLIAMS tinted impregnation :

  • Light-resistant, weather-resistant pigments + UV protection.
  • 100% protection against mold and rot.
  • It does not contain any chemical compounds that can adversely affect the human body (confirmed by a certificate).
  • It does not disrupt the process of air exchange in the upper layers of wood (a guarantee of the absence of mold and rot in the wood).
  • The coating is resistant to aggressive environment (weather conditions, mechanical influences)
  • It does not create a foil, therefore, unlike conventional paints, it does not crack from pressure, temperature and humidity fluctuations
  • It does not require pre-priming, the impregnation is self-priming.
  • It is not subject to peeling, due to the fact that it penetrates deep into the structure of the wood.

Factory painting in compliance with the painting technology ensures the durability of the adhesion of the paint to the wooden surface.

Изображение акции
Акция! Скидка 10% на домокомплекты
More detailed